Brown Fused Alumina is an important material for abrasives,refractory and blasting
industries used for different applications. It's a
hard,tough,abrasion-resistant,heat-resistant,dense material. We
make according to FEPA,JIS,GB,ISO standard to customers in
different industries and countries. 0-1mm,1-3,3-5mm etc for
refractories, FEPA F sizes for bonded abrasives aluminium oxide
tools, FEPA P sizes for coated abrasives aluminium oxide products.
It's an important industrial abrasives,refractory minerals and
sandblasting media. The Brown Fused Alumina we make are with fine
sieve distribution, good chemical contents and bulk density for
high quality abrasives and refractory applications, also a nice
media for sandblasting,shot blasting, polishing,painting etc.
Similar materials we make are White Fused Alumina .
|Grain Shape||Angular or Sharp Edged|
|Grit#||Max Size||Big Size||Basic Size||Mixed Size||Small Size||Chemical Analysis|
Brown Fused Alumina contains 94%-97% Aluminium Oxide(Al2O3) which
makes it an material which resists high temperature,corrosion and
has good thermal conductivity. It is an ideal raw mineral for
shaped and unshaped refractory products and fireproof products,
especially in steel making industry.
Brown Fused Alumina has about 95% Aluminium Oxide(Al2O3) which
makes it have high hardness(Mosh 9). High hardness makes it an
ideal material for cutting,polishing,grinding,sand blasting etc
with more recycle times and not easy to break.
Brown Fused Alumina contains Al2O3 and little content of Titanium
Oxide(TiO2) and Iron Oxide(Fe2O3) and is a very tough material with
9 grade mosh hardness. This character makes it good for cutting,
abrasives, polishing, lapping of various materials and can be used
durably and recycled.
We wash the BFA materials by air,water or acid and remove magnetic
contents by powerful magnetic removing equipment to make sure that
our materials are with little dust and magnetic contents. Dust and
magnetic content may cause cracks on refractory bricks or grinding
wheels, and may cause possible contamination to surfaces blasted or
even explosion without professional care.
Fine Particle Distribution
We make Brown Fused Alumina exactly according to FEPA, China GB,
Japan JIS, American ANSI or International ISO standard on Brown
Fused Alumina Macro Grits and Micro Grits so that our materials are
with fine particle distribution grits. And we check our sieves
against standard from time to time. Our QC people check particle
distribution every 2 hours during production.
Brown Fused Alumina MSDS
MATERIAL SAFETY DATA SHEET(MSDS) OF BROWN FUSED ALUMINA
1 Brown Fused Alumina
Other Name: Brown Fused Aluminium Oxide
EINECS: 215-691-6 Aluminium Oxide Al2O3
Description Abrasive and refractory synthetic aggregate.
Supplied by: Fountain Industrial Co.,Limited
2 Typical Composition
3 Hazards Identification: None specified.
4 First Aid Measures:
EYE CONTACT: Sharp particles can cause irritation. Flush with clean
water and seek medical advice if irritation continues.
Use suitable eye protection as required.
SKIN CONTACT: No harmful effects wash with soap and water.
INHALATION: No toxic effects. Classified as nuisance material.
INGESTION: No toxic effects, treat symptomatically and seek
medical advice as necessary.
5 Fire-fighting Measures: No special precautions necessary.
6 Accidental Release Measures:
Clean spillage's as appropriate.
Use vacuum cleaner for fine aggregate sizes.
7 Handling and Storage:
Handling: Avoid creating unnecessary excess dust during handling.
Storage: No special storage requirements - shelf life indefinite.
8 Exposure Controls/Personal Protection:
Exposure Control Limits: 10mg/m3 total dust. 5mg/m3respirable dust.
Use appropriate dust mask in dusty operations. (avoid creating dust
Protective Equipment: Wear appropriate eye protection during
9 Physical and Chemical
Melting Point: 2050ºC
S.G: 3.6 g/cm3
Flashpoint: Not applicable
Boiling Point: >3000ºC
Colour: Brown, dark blue/purple.
Hazardous decomposition Products: None
Hazardous reactions: None
10 Stability and Reaction: Material is stable and inert.
11 Toxicological Information
Classified as non-toxic
TD Lo 90mg/kg (rat.intra-pleural)
12 Ecological Information: No specific effects.
13 Disposal Considerations: No special precautions required - follow local
14 Transport Information: No specific requirements
15 Regulatory Information: Current dust exposure limits to be found in latest edition of
Health & Safety Executive Guidance Note EH40.
16 Other Information: Aluminium oxide (Brown Fused Alumina)
contains no free silica and is classified as nuisance material.
This information is taken from sources believed to be accurate.
Yichuan Shengyu Abrasives Co.,Limited
however, makes no warranty as to the accuracy of the information or
suitability of the
recommendations as to your operations and assumes no liability to
any user thereof.